Studio Equipment |
Monitor Type Active 2-Way Enclosure Bass-Reflex Power Rating 70 W Impedance 4 Ohms Drivers LF Driver: 1 x 5" / 12.7 cm Cone HF Driver: 1 x 1" / 2.54 cm Dome Amplification 1 x LF Amplifier: Class-D Rated at 45 W 1 x HF Amplifier: Class-D Rated at 25 W Frequency Range 74 Hz to 24 kHz (at -3 dB) 54 Hz to 30 kHz (at -10 dB) Analog Input Sensitivity/Gain-10 dBu
Speaker type: 2-way bi-amp powered studio monitor Crossover: 2kHz Output power: 70W (LF:45W, HF:25W) Power consumption: 45W Net weight: 5.5 kg
Frequency Response: 36Hz - 40KHz Power Output: 203 Watts Height: 15.75" Width: 10.47" Depth: 12.17"
Analog Inputs : 1 x XLR (mic), 1 x 1/4" (Hi-Z) Analog Outputs : 2 x 1/4" TRS Headphones : 1 x 1/4" USB : 1 x Type USB-C Power Supply : USB bus powered
Monitor Type Active 2-Way Enclosure Bass-Reflex, Shielded Power Rating 100 W RMS Drivers LF Driver: 1 x 8" / 20.32 cm Dome with 1" / 2.54 cm Voice Coil Amplification 1 x LF Amplifier: Class-D Rated at 60 W RMS 1 x HF Amplifier: Class-D Rated at 40 W RMS Frequency Range 45 Hz to 21 kHz ± 3 dB Frequency Response 37 Hz to 25 kHz ± 10 dB Maximum Sound Pressure Level (SPL) 114 dB Total Harmonic Distortion (THD)
Phantom Power +48 V switchable, channels 1 - 8 Input Channels 4x mono [mic/line] 2x mono/stereo [mic/line] 2x stereo [line] Output Channels 2x stereo out 1x monitor out 1x headphone out 2x aux out 2x group out Bus Stereo: 1 AUX: 2 GROUP: 2 Pad 26 dB (mono) HPF 80 Hz, 12 dB/oct (mono/stereo: MIC only) Compressor Threshold: +22 dBu to -8 dBu Ratio: 1:1 to 4:1 Output level: 0 dB to 7 dB Attack time: approx. 25 msec Release time: approx. 300 msec Equalizer EQ high gain: +15 dB/-15 dB, Frequency: 10 kHz shelving EQ mid gain: +15 dB/-15 dB, Frequency: 2.5 kHz peaking EQ low gain: +15 dB/-15 dB, Frequency: 100 Hz shelving LED Peak LED turns on when post EQ signal reaches 3 dB below clipping Level Metering 2 x 12 - segment LED meter [PEAK, +10, +6, +3, 0, -3, -6, -10, -15, -20, -25, -30 dB] Total Harmonic Distortion 0.03 % @ +14 dBu (20 Hz to 20 kHz), GAIN knob: Min, 0.005 % @ +24 dBu (1 kHz), GAIN knob: Min Frequency Response +0.5 dB/-1.5 dB (20 Hz to 48 kHz) , refer to the nominal output level @ 1 kHz, GAIN knob: Min Equivalent Input Noise -128 dBu (mono input channel, Rs: 150 Î, GAIN knob: max) Residual Output Noise -102 dBu (STEREO OUT, STEREO master fader: min) Crosstalk -78 dB Power Requirement AC 100 - 240 V, 50 / 60 Hz Power Consumption 22 W
Monitor Type Active 2-Way Enclosure Bass-Reflex, Shielded Power Rating 80 W RMS Drivers LF Driver: 1 x 6.5" / 16.51 cm Dome with 1" / 2.54 cm Voice Coil Amplification 1 x LF Amplifier: Class-D Rated at 40 W RMS 1 x HF Amplifier: Class-D Rated at 40 W RMS Frequency Range 47 Hz to 21 kHz ± 3 dB Frequency Response 39 Hz to 25 kHz ± 10 dB Maximum Sound Pressure Level (SPL) 112 dB Total Harmonic Distortion (THD)
Max Sample Rate/Resolution 192 kHz / 24-Bit Host Connection USB Type-B (USB 2.0) Analog I/O 1 x XLR 3-Pin Mic Input 1 x 1/4" TS Hi-Z Input 1 x 1/4" TRS Headphone Output 1 x Stereo RCA Monitor Output Phantom Power +48 V Digital I/O None MIDI I/O None
Channels of I/O Analog: 2 Inputs / 2 Outputs Max Sample Rate/Resolution 192 kHz / 32-Bit Display and Indicators 2 x LEDs (Clip) 1 x LED (+48V) 1 x LED (Host Connection) 1 x USB Type-C (USB 3.0 / 3.1 Gen 1) Analog I/O 2 x Combo XLR-1/4" TRS Balanced/Unbalanced Mic/Line/Hi-Z Input 2 x 1/4" TRS Balanced Monitor Output 1 x 1/4" TRS Unbalanced Headphone Output Phantom Power +48 V (Selectable on Individual Inputs) Digital I/O None MIDI I/O 1 x MIDI 5-Pin In 1 x MIDI 5-Pin Out
Form Factor Tabletop Channels of I/O Analog: 2 Inputs / 2 Outputs at 192 kHz Max Sample Rate/Resolution 192 kHz / 24-Bit Number of Mic Preamps 2 Input Level Adjustment 2 x Knob Solo/Mute None Pad None High-Pass Filter None Display and Indicators 2 x LEDs (Input Level) 1 x LED (+48 V) 2 x LEDs (Input Selection) 1 x LED (Host Connection) 1 x LED (Monitoring Mode) Expansion Slots None
Channels of I/O Analog: 2 Inputs / 2 Outputs at 96 kHz Max Sample Rate/Resolution 96 kHz / 24-Bit Host Connection 1 x USB Type-C (USB 3.0 / 3.1 Gen 1) Analog I/O 2 x Combo XLR-1/4" TRS Balanced Mic/Line Input 1 x 1/4" TS Balanced Hi-Z Input 1 x 1/4" TRS Unbalanced Headphone Output 2 x 1/4" TRS Balanced Monitor Output Phantom Power +48 V, Selectable On/Off (Selectable on Individual Inputs) Digital I/O None MIDI I/O None Memory Card Slot None Frequency Response Mic Inputs: 10 Hz to 40 kHz ±0.5 dB Line/Hi-Z Inputs: 10 Hz to 20 kHz ±0.5 dB A/D Converters: 10 Hz to fs/2 ±0.5 dB D/A Converters: 10 Hz to fs/2 ±0.5 dB Headphone Outputs: 10 Hz to fs/2 ±0.5 dB
Channels of I/O Analog: 2 Inputs / 2 Outputs at 192 kHz Max Sample Rate/Resolution 192 kHz / 24-Bit Number of Mic Preamps 1 Input Level Adjustment 2 x Knob Solo/Mute None Pad None High-Pass Filter None Display and Indicators 2 x LEDs (Input Level) 1 x LED (+48 V) 1 x LED (Input Selection) 1 x LED (Host Connection) Expansion Slots None
Channels of I/O Analog: 6 Inputs / 4 Outputs Max Sample Rate/Resolution 192 kHz / 32-Bit Display and Indicators 4 x LEDs (Clip) 2 x LEDs (Phantom Power) 1 x LED (Host Connection) Host Connection 1 x USB Type-C (USB 3.0 / 3.1 Gen 1) Analog I/O 2 x Combo XLR-1/4" TRS Balanced/Unbalanced Mic/Hi-Z Input 2 x Combo XLR-1/4" TRS Balanced Mic/Line Input 2 x 1/4" TRS Balanced/Unbalanced Input 4 x 1/4" TRS Balanced/Unbalanced Line Output 2 x 1/4" TRS Balanced Monitor Output 2 x 1/4" TRS Unbalanced Headphone Output Phantom Power +48 V (Selectable on Individual Inputs) Digital I/O None MIDI I/O 1 x DIN 5-Pin Input 1 x DIN 5-Pin Output
Power Consumption 12 W Dimensions 5.9 x 2.4 x 7.9" (149 x 62 x 202 mm) Net Weight 1.98 lb (0.9 kg) Level Metering 2 x 7-segment LED meter [PEAK, +6, +3, 0, -3, -10, -20 dB] Total Harmonic Distortion 0.01% @ +8 dBu (20 Hz to 20 kHz), GAIN knob: min, 0.003% @ +18 dBu (1 kHz), GAIN knob: min Frequency Response +0.5 dB/-0.5 dB (20 Hz to 20 kHz), refer to the nominal output level @ 1 kHz, GAIN knob: min Equivalent Input Noise-128 dBu (mono input channel, Rs: 150 , GAIN knob: max) Residual Output Noise-102 dBu (STEREO OUT, STEREO LEVEL knob: min)
Channels of I/O Analog: 2 Inputs / 2 Outputs Max Sample Rate/Resolution 192 kHz / 32-Bit Display and Indicators 2 x LEDs (Clip) 1 x LED (+48 V) 1 x LED (Host Connection) Host Connection 1 x USB Type-C (USB 3.0 / 3.1 Gen 1) Analog I/O 2 x Combo XLR-1/4" TRS Balanced/Unbalanced Mic/Line/Hi-Z Input 2 x 1/4" TRS Unbalanced Monitor Output 1 x 1/4" TRS Balanced Headphone Output Phantom Power +48 V (Selectable on Individual Inputs) Digital I/O None MIDI I/O 1 x DIN 5-Pin Input 1 x DIN 5-Pin Output
Built-in Effects SPX Algorithm: 24 Programs Parameter Control: 1 x Foot SW: (FX RTN CH On/Off) Phantom Power +48 V Digital I/O USB: USB Audio Class 2.0 Compliant Sampling Frequency: Max 192 kHz Bit Depth: 24-Bit Input Channels 12 x Mono [Mic/Line] 4 x Mono/Stereo [Mic/Line] Output Channels 2 x Stereo Out 1 x Monitor Out 1 x Headphone Out 4 x Aux Out 4 x Group Out Bus Stereo: 1 Group: 4 Aux: 4 Pad 26 dB (Mono) HPF 80 Hz, 12 dB/Oct (Mono/Stereo: Mic Only) Compressor Threshold: +22 dBu to -8 dBu Ratio: 1:1 to 4:1 Output Level: 0 dB to 7 dB Attack Time: Approx 25 ms Release Time: Approx 300 ms
System Type 2-Way Bi-Amped Powered Studio Monitor Frequency Response 38 Hz to 30 kHz Crossover Frequency 2 kHz Transducer LF: 8" (127 mm) Cone HF: 1" (25 mm) Dome Output Power Total: 120W LF: 75W HF: 45W Input Sensitivity -10 dBu / 10 k Inputs 1x Balanced XLR3-31 Type 1x 1/4" (6.35 mm) Balanced TRS Controls Level Control (+4 dB/Center Click) EQ: High Trim Switch (+/- 2 dB @ HF) Room Control Switch(0, -2, -4 dB under 500 Hz) Indicators 1x Power On White LED Power Consumption 60 W Enclosure Type: Bass-Reflex Material: MDF Dimensions (WxHxD) 9.8 x 15.4 x 13.1" (250 x 390 x 334 mm) Weight 22.5 lb (10.2 kg)
Monitor Type Active 2-Way Enclosure Bass-Reflex Power Rating 25 W per Channel Impedance 10000 Ohms Drivers LF Driver: 1 x 4.5" / 114.3 mm Woofer HF Driver: 1 x 1" / 25.4 mm Silk Dome Amplification 2 x Full-Range Amplifier: Class-AB Frequency Response 70 Hz to 20 kHz Maximum Sound Pressure Level (SPL) 100 dB Protections and Limiting Fuse, Output Current Limiting, Subsonic Filter, Thermal Limiting
ENCLOSURE TYPE - Vented, through rear-firing aerodynamic port OVERALL FREQUENCY RESPONSE - 65Hz ~ 20kHz, (3dB) USABLE FREQUENCY RESPONSE - 55Hz ~ 22kHz, (10dB) MAX SPL AT HALF SPACE - 107dB
Impedance 32 Î Sensitivity 104 dB Maximum Input Power 2000 mW Weight (without cable) 215 g Frequency Range 5 - 30000 Hz
|